banner



How To Clean Calcium Build Up In Shower

Introduction

It is non uncommon to have minor, or major, calcium buildup on shower heads over time. This guide will help you to safely and hands remove the calcium past using an piece of cake homemade cleaning solution out of vinegar and h2o. In this guide, you will go through the steps of removing the shower head from the wall spout, making the cleaning solution, the removal of calcium from the shower head, and putting the shower head back on the wall spout.

Parts

  1. Using an adjustable wrench, loosen the bolt that attaches the shower head to the wall spout by turning the wrench counterclockwise. You may be able to loosen the shower head by hand.

    • Using an adjustable wrench, loosen the bolt that attaches the shower caput to the wall spout by turning the wrench counterclockwise.

    • You may exist able to loosen the shower head by hand.

    • Handle carefully because the shower head may be heavy.

  2. Use your hands to finish unscrewing the bolt.

    • Utilise your hands to finish unscrewing the bolt.

    • Remove the shower head from the wall spout.

  3. Pour one cup of water into the plastic bag. Completing this step over a sink may help to avoid spilling the water. Completing this step over a sink may help to avoid spilling the water.

    • Pour one cup of water into the plastic bag.

    • Completing this step over a sink may help to avoid spilling the water.

  4. Pour one cup of distilled vinegar into the plastic bag. Completing this step over a sink may help to avoid spilling the solution. If using the vinegar solution provided in steps 3 and 4 fails to provide adequate results, you may want to repeat the steps using CLR (Calcium, Lime, and Rust) solution instead.

    • Pour one loving cup of distilled vinegar into the plastic pocketbook.

    • Completing this stride over a sink may help to avoid spilling the solution.

    • If using the vinegar solution provided in steps 3 and iv fails to provide acceptable results, you lot may want to repeat the steps using CLR (Calcium, Lime, and Rust) solution instead.

  5. Place the shower head face down into the plastic bag of vinegar solution. Let the shower head sit for one hour before removing it from the plastic bag of vinegar solution.

    • Identify the shower head face downwards into the plastic bag of vinegar solution.

    • Let the shower head sit for one 60 minutes before removing it from the plastic pocketbook of vinegar solution.

  6. After one hour, remove the shower head from the plastic bag of vinegar solution.

    • Later one hour, remove the shower caput from the plastic bag of vinegar solution.

    • Use a metal sponge to scrub in a circular movement to remove the treated calcium on the shower head.

    • Excessive scrubbing could damage the terminate.

  7. Place the shower head under running water to remove any extra calcium left behind. If calcium is  still present, repeat steps 5 through 7 as needed.

    • Place the shower head under running water to remove whatsoever extra calcium left behind.

    • If calcium is still nowadays, repeat steps 5 through seven equally needed.

  8. Clamp the adjustable wrench onto the bolt of the shower head. Turn the adjustable wrench clockwise to tighten the shower head back onto the water spout.

    • Clamp the adjustable wrench onto the bolt of the shower head.

    • Plow the adjustable wrench clockwise to tighten the shower head back onto the h2o spout.

Jacob Abrego

Member since: 02/23/2016

138 Reputation

1 Guide authored

Team

I Comment

Source: https://www.ifixit.com/Guide/How+to+Remove+Calcium+Buildup+from+a+Shower+Head/61771

Posted by: tidwellbrourcomis.blogspot.com

0 Response to "How To Clean Calcium Build Up In Shower"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel